Features Monolithic 3.3 V device that integrates an E1/T1/J1 Framer and line driver for shorthaul and longhaul applications.Software selectable between T1/J1 and E1 operation on a per device basis.Provides fully programmable shorthaul and longhaul pulse templates and line build out.Meets or exceeds T1, J1, and E1 shorthaul and longhaul network access specifications, which include: ANSI T1.102, T1.403, T1.408, AT&T TR 62411, ITU-T G.703 and G.823, as well as the newer G.775 and ETSI 300-011 specifications.Supports B8ZS, HDB3, and AMI line codes.Provides receive clock recovery and line performance monitoring.Provides on-board binary sequence generators and detectors that can be configured with various patterns for error testing, including those conforming to ITU-T 0.151.Provides transmit and receive jitter attenuation.Provides three full-featured HDLC controllers, each with 128-byte transmit and receive FIFOs, enabling dual compliance to the V5.1 and V5.2 interface standards.Supports an IEEE P1149.1 JTAG test port.Automatically generates DS1 performance report messages to ANSI T1.231 and other specifications.Compatible with Mitel ST,-bus, AT&T CHI,, and MVIP PCM backplanes supporting rates of 1.544 Mbit/s, 2.048 Mbit/s, 4.096 Mbit/s and 8.192 Mbit/s. Provides an 8-bit microprocessor bus interface for configuration, control, and status monitoring.Low power +3.3 V CMOS technology.Available in an 80-pin PQFP (14 mm by 14 mm) and an 81-pin CABGA (9 mm by 9 mm) package.Provides a -40 °C to +85 °C industrial temperature operating range.
Typical Applications include:
- Wireless Base Transceiver Station and Digital LoopCarriers (DLCs).
- BITS Timing Systems.
- Integrated Access Device (IAD).
- Channel and Data Service Units (CSU/DSU).
- Enterprise Routers.
- V5.1/V5.2 Interfaces.
Are you seeing all your results?
If you are a PMC-Sierra Customer or Partner you may have permission
to see additional results on the myPMC product page.
Please log in to the myPMC product page to check.
||COMET [17 kB] PMC-991074